English
Dec 09 , 2024
The dimensions of a Yagi LPDA Antenna for all channels include length, width, height, and the distance from the RF feed line. Specific dimensions vary depending on the frequency band. This article provides a detailed introduction to the dimensions of the Yagi LPDA Antenna for all channels, including aspects such as length, width, height, and the distance from the RF feed line.
Yagi LPDA Antenna is a widely used antenna in wireless communication systems, invented by Japanese scholars Hidetsugu Yagi and Shintaro Uda. A Yagi LPDA Antenna for all channels is a design scheme that is compatible with different frequency bands and can provide high-quality wireless signal coverage across various frequency bands.
The dimensions of the Yagi LPDA Antenna for all channels vary slightly depending on the frequency band. Generally speaking, the more common Yagi LPDA Antenna all-channel dimensions are as follows:
The length of the Yagi LPDA Antenna for all channels is usually between 0.5 to 3 meters. The length is influenced not only by the frequency band but also by the application scenario of the antenna. For instance, antennas in urban areas are generally shorter, while those in rural or mountainous areas tend to be longer.
Yagi LPDA Antenna all-channel width is usually between 0.4 to 1 meter. The width also varies depending on the application scenario. Generally, the greater the width, the better the antenna can receive more signals, thereby providing better signal coverage.
Yagi LPDA Antenna all-channel height is usually between 0.4 to 1 meter, and the height is also determined by the application scenario. In urban areas, the antenna height is relatively low, while in mountainous or rural areas, the height is higher.
The location of the RF feed line connection for the Yagi LPDA Antenna for all channels is usually at the front or rear end of the antenna. The distance of the connection location also varies according to different frequency bands. For example, for the VHF band (30-300MHz), the distance from the upper end of the antenna is approximately 0.2 to 0.3 meters; for the UHF band (300-3000MHz), the distance from the lower end of the antenna is about 0.3 to 0.5 meters.
The Yagi LPDA Antenna for all channels is widely used in wireless communication systems, television, and radio transmission. In the field of wireless communication, the Yagi LPDA Antenna for all channels can provide high-quality, high-coverage wireless signals, ensuring the normal operation of wireless communication systems. In the field of television and radio, the Yagi LPDA Antenna for all channels can receive more television channels and radio channels, thereby providing better television and radio services.
In summary, the Yagi LPDA Antenna for all channels is a design scheme that is compatible with different frequency bands and can provide high-quality wireless signal coverage across various frequency bands.
