English
Power Splitter, Broadband High Bandwidth 698 - 2700 MHz include GSM900, CDMA, GSM1800 and UMTS WiFi,4G,LTE.
The power splitter is designed to equally split one input signal into 2, 3 or 4 outputs.
When building an indoor coverage system the splitter is often used to split signals between floors and antennas.
The functionality of handling both transmitting and receiving signals in the same path is highly beneficial since the TX signal is split and the RX signal is combined in the same stage and component.
This is a three-way splitter that allows you to split the amplified signal with minimum signal loss to three inside antennas in similarly sized areas. Each inside antenna connection has 0.5 dB signal loss.
The full band splitters cover band systems from 698MHz to 2700MHz.
| Electrical Specifications | |
| Passband | 700-2700MHz |
| Input return loss | ≤5.4dB |
| VSWR | ≤1.4 |
| Isolation | ≥20dB |
| Max input power/port | 50W |
| Impedance in/out | 50Ω |
| Mechanical Specifications | |
| Dimensions (W x H x D) | 120x90x21mm |
| Weight | 283g |
| Connector | SMA Female |
| Environmental Specifications | |
| Temp. range (normal operation) | -40 to +60℃ |
| Humidity | Relative 5 - 95% |
| Sealing | IP65 |
3 way SMA female power splitter 700-2700MHZ can work for verizon, A T&T, any carriers.
Using microstrip structures, in-band flatness is good, high isolation, insertion loss is small, standing wave good performance, easy installation.
It's for cellular mobile communications and spread spectrum communications in indoor distribution system.
Asian Creation pays attention to the quality and service. We Keeping progressing, Pursuing integrity, Embracing future. Our teams arelways enthusiastic and welcome to visit us and join hands for a prosperous future.
