Asian Creation Service

The panel antenna is mainly used in outdoor applications. The panel antenna is connected to the device through N-connector RF cables. In order to achieve better receiving and receiving effect of outdoor panel antenna, the antenna must be installed on the highest place possible, such as the roof, the top of the mountain and the top of the tower, to avoid the influence of metal obstacles as far as possible, and the transmitting end must avoid obstacles as far as possible. Generally speaking, the higher the antenna is installed, the better the performance will be.

Fix the U-shaped screw and U-shaped clamping plate on the antenna holder. After the U-shaped screw passes through the U-shaped clamping plate and grips the holder, select the required L-clamping hole and fix it with nuts, flat washers and spring washers. If the antenna pitch Angle needs to be adjusted during installation, you can select different angles to fix the adjusting holes.

When high-gain Omni fiberglass antennas are used, ensure that the transceiver antennas are in the same horizontal position outdoors where the communication distance is very long. The omnidirectional antenna has 2 SMA female connectors or N female connectors. Easy installation with double U-bolt mast mounting kit.

The main advantage of parabolic dish antennas is their high directivity. Parabolic antennas are used as high-gain antennas for point-to-point communication. Broadband operation, vertical or horizontal polarization, extremely rugged in extreme environments.The antenna is supplied with the stand and can be easily set up in both directions.